Members:
1171

See All Leaderboard
Monthly Prize Monthly Prize
Yearly Prize Yearly Prize

Maintenance

Replacing Reich Mover Rollers

Total Posts: 17
Please correct the mistakes below:
Posted: 6 years ago
The rollers on my Reich mover lost their grit, so I've got hold of some replacement aluminium ones through ebay. Once the current monsoon over Buckinghamshire dies down and the weather looks a bit more settled, I'll be crawling underneath my Sterling Eccles Jewel to make the swap. Does anyone have any tips on making this as simple as possible, please? - Is there anything to be wary of?
Total Posts: 17
Please correct the mistakes below:
Posted: 6 years ago
I am now able to answer my own question! Piece of cake - put nose of unit up in the air as far as possible, to make it easier to slide around underneath. Three bolts to undo on each motor, slide motor off the end of the roller, remove the roller, clean everything up, slide in the new roller and replace the bolts (with new self-locking nuts). Check roller clearance and Robert's your father's brother.