General

Caravan heating

Total Posts: 169
Please correct the mistakes below:
Posted: 5 years ago
Have just purchased new caravan with Alde heating system, but inside heating always seems to show false readings on actual inside temperature. Does anyone else have this problem?
Total Posts: 228
Please correct the mistakes below:
Posted: 5 years ago
I am sure that there is a facility in the menu to reajust the readout so that it is accurate
Total Posts: 228
Please correct the mistakes below:
Posted: 5 years ago
Ah! on page 18 of the operating instructions for the control panel it states :- press the button with the arrow symbol until the lower section lights up and the menu symbol flashes, then press the ON button, OF will appear in the display, then press either the ON + or OFF - until the temperature matches the temperature to what ever gadget or thermometer you are using to give you the inside temperature, the set temperature goes up or down in increments of 0.5 degrees so set it either 0.5 higher or 0.5 lower then press the store button, job done. You can buy an optional outside sensor that will also display outside temperature but for some at between £18 and £20 depending on cable length is an unnecessary expense
Total Posts: 169
Please correct the mistakes below:
Posted: 4 years ago
hi rcpiot, sorry just read your response,caravan in storage at the moment but will try your theory. thanks